In-Vehicle DC-DC Battery ChargerEnquire Now
The DCC Pro In-Vehicle DC-DC Battery Charger was developed for the purpose of charging and maintaining any auxiliary battery in an installation where the starting battery is used as the supply source. It has been designed for use in 4WDs, RVs, buses, coaches, caravans, campers or any vehicle with a 12VDC electrical system.
The DCC Pro is built for our tough Australian conditions. Unlike many imported products, particularly those produced for the European market, it is designed to maintain output in the harshest of environments under the highest ambient temperatures.
The DCC Pro is a standalone power conversion device. It will manage a variety of different battery types according to their specific charging requirements. As no modification to the vehicle’s original wiring is required this ensures the manufacturer’s electrical system is not compromised in any way.
The DCC Pro is a highly innovative product with many unique features. It has the flexibility to adapt to almost any vehicle, old or new, simple or complex with or without an ECU controlled electrical system and even allows the operator monitor the charging status from the comfort of the cabin!
- Product Photos
The best in-class performance for a charger of this size
The DCC Pro is a true 25 Amp charger, that is, 25 Amps at 50°C all day, every day. In addition the DCC Pro will continue charging at reduced output right up to 85°C!
Remote monitoring from the comfort of the driving seat
The DCC Pro is kitted with an interactive, in-cabin display for remote monitoring of the auxiliary charging status from both main and solar power charging sources.
Solar ready – no need for a separate regulator or relay
The DCC Pro is a complete MPPT solar charge controller capable of handling 250 Watts of power with up to 30% greater efficiency than a standard PWM regulator.
Under bonnet charging device is dust and water proof
The DCC Pro is sealed to IP67 standard and is designed to be mounted in the engine bay or on the chassis itself. The DCC Pro can handle temporary submersion!
Capable of monitoring two chargers on a single display
The DCC Pro Remote Display can accept and monitor two Individual Charging Devices at once! No need to purchase a second display when two auxiliary batteries are used.
Input Voltage –
- • Main: 9 – 17 VDC,
- • Solar Input: 27 VOC max. (open circuit – no load)
Solar Power – 250 Watts nominal (300 Watts peak)
Continuous Rating – 25 Amps @ 50°C
Current Draw –
- • Charging Device: Including LED indicator <10mA
- • Remote Display: With backlight off: 10mA max,
- • With backlight on: 30mA max
Boost Voltage –
- • Standard Lead Acid: 14.4 VDC Nominal
- • Absorbed Glass Mat: 14.6 VDC Nominal
- • Gelified Electrolyte: 14.2 VDC Nominal
- • Lead Calcium: 14.8 VDC Nominal
Float Voltage – 13.2 VDC Nominal
Electrical Protection –
- • Thermal overload shutdown – auto reset
- • Electrical overload shutdown – auto reset
- • Under voltage disconnect – auto re-connect
- • Over voltage disconnect – auto re-connect
- • Reverse polarity protection of main terminals
Environmental Protection –
- • Charging Device: IP67 (internal components only)
- • Remote Display: IP40 (not dust or water resistant)
Operating Temperature – -20°C to +85°C Operating Humidity – Up to 98% Charging Device Materials – Remote Display Materials – Terminal Material – Tin plated brass Terminal Fasteners – 304 stainless steel Conformity – AS/NZS CISPR 11:2004 for EMC Dimensions – Weight –
Operating Temperature – -20°C to +85°C
Operating Humidity – Up to 98%
Charging Device Materials –
Remote Display Materials –
Terminal Material – Tin plated brass
Terminal Fasteners – 304 stainless steel
Conformity – AS/NZS CISPR 11:2004 for EMC
No videos available at the moment.